Take a tool with you

Equipment rental

Some of the workshop's tools can go home or to a site with you: measurement instruments, soldering gear — the things that are handy to have around for a couple of days but not worth buying.

Everything happens on your phone: pick the period, pay by card, come and take it. There is no staff on site, so the door opens for you at any hour, even if you have no access days.

from 5 € a day
No deposit
The door opens for pick-up

What can be rented How it works

What you can rent

Price per day, no deposit. Open the tool's page to pick the number of days and pay.

M01

Measurement

Bench Multimeter OWON XDM1241

55,000-count bench multimeter at the Tallinn hackspace. OWON XDM1241 with true RMS, capacitance, frequency, temperature and USB logging for precise measurements on the electronics bench.

5 € / per day Available

M05

Measurement

tinySA Ultra Portable Spectrum Analyser

Pocket spectrum analyser, 100 kHz – 5.3 GHz, at the Tallinn hackspace: tinySA Ultra with a built-in signal generator. Battery powered, and available to rent.

5 € / per day Available

M08

Measurement

ATTEN ST-1090 Soldering Tip Thermometer

ATTEN ST-1090 at the Tallinn hackspace: a soldering tip thermometer, 0–800 °C, replaceable three-contact sensor and a socket for an external K-type thermocouple.

10 € / per day Available

M09

Measurement

UNI-T UT612 Handheld LCR Meter

UNI-T UT612 LCR meter at the Tallinn hackspace: inductance, capacitance and resistance at five frequencies up to 100 kHz, with ESR, Q factor and loss angle.

5 € / per day Available

FNIRSI HRM-10 Battery Internal Resistance Tester

M10

Measurement

FNIRSI HRM-10 Battery Internal Resistance Tester

FNIRSI HRM-10 at the Tallinn hackspace: a battery internal resistance tester using four-wire Kelvin clips, reading resistance and voltage at the same time. A milliohmmeter in your pocket.

5 € / per day Available

M11

Measurement

FNIRSI FNB58 USB Power Meter

FNIRSI FNB58 at the Tallinn hackspace: a USB tester for 4–28 V and 7 A with fast-charge protocol detection, ripple measurement and cable resistance.

5 € / per day Available

ATTEN ST-8802 Soldering and Hot Air Station

S01

Electronics

ATTEN ST-8802 Soldering and Hot Air Station

Soldering station with hot air at the Tallinn hackspace: ATTEN ST-8802, 65 W iron up to 480 °C, 800 W hot air up to 500 °C, solder and flux on site. Available for rent. Access 24/7.

10 € / per day Available

M14

Measurement

InfiRay T2S+ Thermal Camera

The InfiRay T2S+ thermal camera at the Tallinn hackspace: clips onto a phone, 256 × 192, 12 µm pixel, manual focus over a wide range. See what is getting hot on a board.

15 € / per day Available

M15

Measurement

Nordic Power Profiler Kit II

The Nordic PPK2 at the Tallinn hackspace: measures current from hundreds of nanoamps to one amp at 100,000 samples per second. For battery-powered devices.

5 € / per day Available

P07

Electronics

FNIRSI DPS-150 Portable Power Supply

FNIRSI DPS-150 at the Tallinn hackspace: a pocket bench power supply up to 30 V and 5 A, running off a USB-C PD charger. Available to rent and to work with anywhere.

5 € / per day Available

P05

Electronics

PCWork PCW07B Power Supply, 0–50 V

Compact bench power supply at the Tallinn hackspace: PCWork PCW07B, 0–50 V, 0–3 A, switching, LED display, over-voltage protection. Available for rent. Access 24/7.

10 € / per day Available

S06

Electronics

Miniware TS1C Cordless Soldering Iron

The Miniware TS1C cordless soldering iron at the Tallinn hackspace: a supercapacitor instead of a battery, five-minute charge, 100–400 °C, TS80-series tips.

5 € / per day Available

S07

Electronics

SEQURE HT140 Hot Tweezers

SEQURE HT140 hot tweezers at the Tallinn hackspace: lift an SMD part in seconds, 50–500 °C, USB-C PD powered, C120 tweezer cartridges and C210 iron tips.

5 € / per day Available

S08

Electronics

Battery Spot Welder

A cordless battery spot welder at the Tallinn hackspace: welds nickel strip to 18650 cells, with an adjustable pre-pulse and main pulse length.

10 € / per day Available

T02

Hand tools

FERM GGM1003 Cordless Glue Gun

A cordless FERM GGM1003 glue gun at the Tallinn hackspace: 7.2 V, 7 mm sticks, ready in 15 seconds, no trailing cable. Available to rent.

5 € / per day Available

C09

Optics

Sony Alpha A65 Camera with Two Lenses

A Sony Alpha A65 DSLR at the Tallinn coworking space: 24 megapixels and two lenses — an 18–55 zoom and a fast 50 mm f/1.8 prime. Available to rent.

15 € / per day Available

C08

Office

Epson EB-U04 Projector

An Epson EB-U04 projector at the Tallinn coworking space: 3LCD, WUXGA 1920 × 1200, 3000 lumens, two HDMI inputs. Available to rent for an event.

15 € / per day Available

How it works

Sign in with Smart-ID and sign the agreement in the cabinet. It is one agreement for everything; there is no separate rental contract.
Open the tool's page, choose the number of days and pay by card. The period starts today.
Open the door from the cabinet, find the tool by the code on its sticker and take it. Mark “I took it” in the cabinet or by scanning the sticker's QR code.
Bring the tool back by the end of the last day and mark “I brought it back”.

Period, price, refunds

The price is per day and shown on the tool's page; there is no deposit. Rentals run from one to fourteen days; they cannot be extended, but a new rental can follow if nobody has taken the tool in between.

Until the tool is picked up, a rental can be cancelled by writing to clients@fab20.ee before the end of the first day, with a full refund. Once the tool is picked up, the fee is not refunded.

Responsibility

The tool comes back in the condition and completeness it was received in. Loss, damage and non-return are on the renter: the cost of repair or replacement, and the same daily fee for each day of delay. Details in clauses 5.11–5.15 of the agreement.

Sign the agreement once, then rent in two taps

Sign in with Smart-ID, sign the membership agreement in the cabinet — it covers rentals too — and take any tool from the list.