The workshop

Hackspace

A workshop with new equipment five minutes from Vabaduse väljak: laser cutting, 3D printing, all kinds of soldering and measurement equipment, hand tools and materials in one room. Open around the clock, no interviews — start working five minutes from now.

Feeling unsure, or don't know where to begin? Write to us, we will arrange a visit and show you everything. And of course, join our Telegram community and talk to people there.

By the way, the coworking room is next door — for when you need a quiet place and a proper desk.

Pärnu mnt 30, Tallinn
Open 24/7
Equipment: 53

Get access See the equipment

Next door: the coworking room — a quiet place to work →

What's in this room

Everything in the workshop, with instructions and safety notes. Access is included in the plan — no per-machine fees.

Cutting

CO2 Laser Cutter HL-1060, 100 W

Laser cutting and engraving in central Tallinn. A 100 W CO2 laser HL-1060 with a 1000 × 600 mm bed for plywood, acrylic, leather and paper. Access 24/7.

Induction required

Printing

Anycubic Kobra 3 Combo 3D Printer

FDM 3D printing in central Tallinn: Anycubic Kobra 3 Combo, 250 × 250 × 260 mm, four ACE Pro spools for multi-colour prints, PETG in stock. Access 24/7.

Printing

Anycubic Kobra 3 Max Combo 3D Printer

Large-format FDM 3D printing in central Tallinn: Anycubic Kobra 3 Max Combo, 420 × 420 × 500 mm, four ACE Pro spools, PETG in stock. Access 24/7.

Printing

QIDI X-Smart 3 3D Printer

Enclosed CoreXY 3D printer in central Tallinn: QIDI X-Smart 3, 175 × 180 × 170 mm, up to 500 mm/s, ABS and ASA without warping. Access 24/7.

Measurement

Micsig TO3004 Oscilloscope

Tablet oscilloscope, 300 MHz, 4 channels, 2 GSa/s at the Tallinn hackspace. Micsig TO3004 with I2C, SPI, UART, CAN and LIN decoding, four probes included. Access 24/7.

Measurement

RIGOL RSA3030N Spectrum Analyser

Real-time spectrum analyser 9 kHz – 3 GHz with VNA, tracking generator and the EMI option at the Tallinn hackspace. RIGOL RSA3030N, TekBox TEM cell, calibration kit. Access 24/7.

Measurement

Bench Multimeter OWON XDM1241

55,000-count bench multimeter at the Tallinn hackspace. OWON XDM1241 with true RMS, capacitance, frequency, temperature and USB logging for precise measurements on the electronics bench.

Rental: 5 € / per day

Measurement

tinySA Ultra Portable Spectrum Analyser

Pocket spectrum analyser, 100 kHz – 5.3 GHz, at the Tallinn hackspace: tinySA Ultra with a built-in signal generator. Battery powered, and available to rent.

Rental: 5 € / per day

Measurement

Sensepeek PCBite Board Holder and Probes

Sensepeek PCBite at the Tallinn hackspace: A4 and A5 steel base plates, magnetic board holders and probes on flexible arms, including an SQ200 200 MHz oscilloscope probe.

Measurement

ATTEN ST-1090 Soldering Tip Thermometer

ATTEN ST-1090 at the Tallinn hackspace: a soldering tip thermometer, 0–800 °C, replaceable three-contact sensor and a socket for an external K-type thermocouple.

Rental: 10 € / per day

Measurement

UNI-T UT612 Handheld LCR Meter

UNI-T UT612 LCR meter at the Tallinn hackspace: inductance, capacitance and resistance at five frequencies up to 100 kHz, with ESR, Q factor and loss angle.

Rental: 5 € / per day

Measurement

FNIRSI HRM-10 Battery Internal Resistance Tester

FNIRSI HRM-10 at the Tallinn hackspace: a battery internal resistance tester using four-wire Kelvin clips, reading resistance and voltage at the same time. A milliohmmeter in your pocket.

Rental: 5 € / per day

Measurement

FNIRSI FNB58 USB Power Meter

FNIRSI FNB58 at the Tallinn hackspace: a USB tester for 4–28 V and 7 A with fast-charge protocol detection, ripple measurement and cable resistance.

Rental: 5 € / per day

Measurement

HackRF One SDR Transceiver

HackRF One software defined radio in a Tallinn hackspace: receive and transmit from 1 MHz to 6 GHz, 20 MHz of bandwidth, GNU Radio and SDRangel. Open 24/7.

Induction required

Measurement

RF Accessories: Adapters, Calibration Kits, Antennas

The RF accessories box at the Tallinn hackspace: N, SMA and BNC adapters, open/short/load calibration kits, a DC block to 6 GHz, and 433 and 868 MHz antennas.

Measurement

InfiRay T2S+ Thermal Camera

The InfiRay T2S+ thermal camera at the Tallinn hackspace: clips onto a phone, 256 × 192, 12 µm pixel, manual focus over a wide range. See what is getting hot on a board.

Rental: 15 € / per day

Measurement

Nordic Power Profiler Kit II

The Nordic PPK2 at the Tallinn hackspace: measures current from hundreds of nanoamps to one amp at 100,000 samples per second. For battery-powered devices.

Rental: 5 € / per day

Measurement

Tektronix TDS 794D Oscilloscope, 2 GHz

A four-channel 2 GHz Tektronix TDS 794D oscilloscope at the Tallinn hackspace: 4 GS/s, digital phosphor. The fastest instrument in the workshop, for fast edges.

Measurement

Rohde & Schwarz SMIQ 03B Signal Generator

A Rohde & Schwarz SMIQ 03B vector signal generator at the Tallinn hackspace: 300 kHz – 3.3 GHz, −140 to +13 dBm, analogue and digital modulation.

Electronics

ATTEN ST-8802 Soldering and Hot Air Station

Soldering station with hot air at the Tallinn hackspace: ATTEN ST-8802, 65 W iron up to 480 °C, 800 W hot air up to 500 °C, solder and flux on site. Available for rent. Access 24/7.

Rental: 10 € / per day

Electronics

150 W Electronic Load

A 150 W electronic load at the Tallinn hackspace: test a power supply under load, measure the real capacity of a battery, with cut-off by current, voltage and time.

Electronics

ZD-8915 Desoldering Station

Vacuum desoldering station at the Tallinn hackspace: ZD-8915, 90 W, 160–480 °C, a heated tip with a pump lifts through-hole parts without tearing pads. Access 24/7.

Electronics

IR6500 Infrared BGA Rework Station

Infrared BGA rework station at the Tallinn hackspace: IR6500, 400 W top heater, 800 W bottom preheater, boards up to 400 × 305 mm, thermocouples, balls and flux on site. Access 24/7.

Electronics

FNIRSI DPS-150 Portable Power Supply

FNIRSI DPS-150 at the Tallinn hackspace: a pocket bench power supply up to 30 V and 5 A, running off a USB-C PD charger. Available to rent and to work with anywhere.

Rental: 5 € / per day

Electronics

OWON SPE3102 Programmable Power Supply

Bench power supply at the Tallinn hackspace: OWON SPE3102, 0–30 V, 0–10 A, 200 W, current limit, OVP and OCP protection, a consumption graph on the screen. Access 24/7.

Electronics

PCWork PCW07B Power Supply, 0–50 V

Compact bench power supply at the Tallinn hackspace: PCWork PCW07B, 0–50 V, 0–3 A, switching, LED display, over-voltage protection. Available for rent. Access 24/7.

Rental: 10 € / per day

Electronics

Farnell PDA3502A Dual-Channel Power Supply

Dual-channel linear bench power supply at the Tallinn hackspace: Farnell PDA3502A, two channels 0–35 V, 0–2 A, tracking mode for symmetrical ±V supplies for analogue circuits. Access 24/7.

Electronics

Creworks Ultrasonic Cleaner

Ultrasonic cleaner at the Tallinn hackspace: Creworks with a basket, a lid and a timer, filled with isopropanol for washing flux off boards. Access 24/7.

Electronics

ATTEN ST-1016 Solder Smoke Absorber

The ATTEN ST-1016 bench smoke absorber at the Tallinn hackspace: a fan with a carbon filter that pulls flux smoke out of your breathing space while you solder.

Electronics

ELESHOP ELE-FU1 Fume Extractor

The ELESHOP ELE-FU1 desktop fume extractor at the Tallinn hackspace: a flexible hose with a hood and three filter stages — cotton pre-filter, HEPA and activated carbon.

Out of order · 16 November 2026

Electronics

Miniware TS1C Cordless Soldering Iron

The Miniware TS1C cordless soldering iron at the Tallinn hackspace: a supercapacitor instead of a battery, five-minute charge, 100–400 °C, TS80-series tips.

Rental: 5 € / per day

Electronics

SEQURE HT140 Hot Tweezers

SEQURE HT140 hot tweezers at the Tallinn hackspace: lift an SMD part in seconds, 50–500 °C, USB-C PD powered, C120 tweezer cartridges and C210 iron tips.

Rental: 5 € / per day

Electronics

Battery Spot Welder

A cordless battery spot welder at the Tallinn hackspace: welds nickel strip to 18650 cells, with an adjustable pre-pulse and main pulse length.

Rental: 10 € / per day

Electronics

STM32 Development Boards

A container of STM32 development boards at the Tallinn hackspace: Nucleo H7, G4, U0 and U5, ST-LINK V3 probes including the V3-PWR with power measurement.

Electronics

Renesas Boards: GreenPAK and ForgeFPGA

A container of Renesas boards at the Tallinn hackspace: a GreenPAK Lite Dev Board with a set of DIP-packaged chips, and a ForgeFPGA Evaluation Board with 1120 LUTs.

Electronics

TI and NXP Development Boards

Texas Instruments and NXP development boards at the Tallinn hackspace: a LaunchPad with the MSPM0L1117 and the FRDM-MCXN947. For trying something other than STM32.

Electronics

Displays and Indicators

A container of displays at the Tallinn hackspace: TFT, OLED, 1602 character LCDs, LED matrices and seven-segment indicators for Arduino and STM32 prototypes.

Electronics

Arduino Sensors Kit, 37 in 1

A 37-piece sensor and module kit for Arduino at the Tallinn hackspace: temperature, light, motion, sound, hall and IR, in an organiser with labelled compartments.

Electronics

Test Leads and Wires

A container of test leads at the Tallinn hackspace: banana-to-banana cords, crocodile clips, probes and bags of plugs for the power supplies and multimeters.

Electronics

Module Box

A box of modules for prototypes at the Tallinn hackspace: relay boards, an ultrasonic rangefinder, keypads, battery holders, prototyping boards and assorted parts.

Electronics

Stepper Motors and Drivers

A container of stepper motors, servos and drivers at the Tallinn hackspace: for mechanisms, feeds, rotary axes and home-built machines.

Electronics

Motors and Pumps

A container of small motors and pumps at the Tallinn hackspace: brushed motors, gearmotors, diaphragm and peristaltic pumps, and a solenoid valve.

Electronics

Breadboards and Jumpers

A container of solderless breadboards and jumper wires at the Tallinn hackspace: boards of several sizes, flexible and pre-cut rigid wire sets, terminals.

Electronics

Component Kit Shelf

The component kit shelf at the Tallinn hackspace: SMD resistor and capacitor books in several sizes, through-hole parts, electrolytics and LEDs.

Electronics

Wire, Connectors and Crimping Shelf

The wire and connector shelf at the Tallinn hackspace: hook-up wire, connector kits, heat shrink and crimping tools — crimpers, a stripper, ribbon cable and spools.

Optics

Andonstar AD407 Digital Microscope

Digital microscope for soldering at the Tallinn hackspace: Andonstar AD407, 7-inch screen, up to 270×, photos and video to microSD, two lamps and an IR remote for brightness. Access 24/7.

Optics

OPTIKA ST-50Led Stereo Microscope

Stereo microscope for soldering at the Tallinn hackspace: OPTIKA ST-50Led, 20×, 119 mm working distance, overhanging stand and no stage — a soldering iron fits underneath.

Hand tools

FERM GGM1003 Cordless Glue Gun

A cordless FERM GGM1003 glue gun at the Tallinn hackspace: 7.2 V, 7 mm sticks, ready in 15 seconds, no trailing cable. Available to rent.

Rental: 5 € / per day

Hand tools

Fasteners Shelf

The fasteners shelf at the Tallinn hackspace: M3 and M4 screws to DIN 7985 and DIN 965, nuts, washers and self-tappers, in labelled drawers and organisers.

Hand tools

Hand Tool Kits, Blue and Yellow

Two identical hand tool kits at the Tallinn hackspace: screwdrivers, pliers, cutters, a knife, a tape measure and a rule in a box you carry to your bench.

Hand tools

Black+Decker Cordless Rotary Tool

A cordless rotary tool at the Tallinn hackspace: cutting, grinding, polishing and drilling small things, with sets of bits, cut-off discs and micro drills.

Hand tools

Tapes Box

A box of tapes at the Tallinn hackspace: PVC insulating tape in several colours, packing tape, masking tape, double-sided and reinforced.

Hand tools

Assorted Hand Tools

The hand tool shelf at the Tallinn hackspace: precision screwdrivers, bit sets, tweezers, small spanners and hex keys — for fine and precise work.

Photos

What's included

Any machine in the room — no hourly fees
Consumables within reason: filament, solder, electronic components, acrylic sheets and other materials
Hand tools, measuring instruments and soldering stations
Coffee, tea and snacks, cleaning, fast internet
No fear — don't be afraid of breaking something

If something is missing, tell us — we buy things people actually ask for.

Rent and take home

Some of the equipment can be rented and taken home — arranged just as automatically, on the site. Look for the “Rental” mark on the equipment pages.

Getting to work

Every machine has its own page with instructions, materials and safety rules — read it carefully! Some equipment may require a short induction before first use.

A place for you

There are no interviews, approvals or joining fees — this is a commercial service. Asking for help is welcome and encouraged; being sociable is optional.

Made in this room

Projects →

KIISU — a pocket tool for radio and NFC

KIISU is a credit-card-sized board compatible with Flipper Zero firmware: Sub-GHz, NFC, RFID, IR, BLE, iButton, GPIO. Developed by RainWalker in Tallinn; prototypes are built in the FAB20 workshop.

Share your success!

Made something here? Write to us and we will add it to this page.

Write to us →

Ready to start?

from €5 a day ·Free access ·Gift certificate

Get access

from €5 a day

Pärnu mnt 30, Tallinn

Get access